SPECIFICATIONS
Rotary BJM160S6 ~ BJM400S6
Description | UNIT | BJM160S6 | BJM200S6 | BJM250S6 | BJM400S6 |
International Size | 1600-325 | 2000-770 | 2500-770 | 4000-1230 | |
CLAMPING UNIT | |||||
Clamping force | KN | 1600 | 2000 | 2500 | 4000 |
Opening stroke | mm | 400 | 490 | 460 | 600 |
Max.daylight | mm | 850 | 1060 | 1090 | 1250 |
Platen size | mm | 990×850 | 1252×900 | 1250×1150 | 1300×995 |
Bars distance | mm | 700×420 | 910×510 | 910×570 | 1020×630 |
Diameter of rotational mold adapter | mm | Φ730 | Φ896 | Φ1000 | Φ1120 |
Max. rotational mold diameter | mm | Φ850 | Φ1074 | Φ1118 | Φ1329 |
Max.mold thinkness | mm | 450 | 600 | 510 | 650 |
Min.mold thinkness | mm | 150 | 150 | 200 | 300 |
Ejector stroke | mm | 110 | 150 | 110 | 140 |
Ejector force | KN | 2×34 | 2×65 | 2×34 | 2×65 |
Molds positing center`s distance | mm | 420 | 500 | 490 | 500 |
INJECTION UNIT | A/B | A/B | A/B | A/B | |
Screw diameter | mm | 28/28 | 36/42 | 36/42 | 52/36 |
Screw L/D ratio | 20/20 | 20/20 | 20/20 | 20/20 | 19.9/20 |
Injection pressure | Mpa | 221/221 | 185/190 | 185/222 | 180/185 |
Shot volume | cm3 | 74/74 | 163/249 | 163/249 | 520/163 |
Shot weight (PS) | g | 62/62 | 153/234 | 153/234 | 462/153 |
Injection rate | g/s | 62/62 | 78/95 | 78/95 | 153/78 |
Screw stroke | mm | 120/120 | 160/180 | 160/180 | 245/160 |
Screw speed | r.p.m. | 206/206 | 187/164 | 187/164 | 170/187 |
POWER UNIT | |||||
Hydraulic system pressure | Mpa | 17.5 | 16.0 | 17.5 | 17.5 |
Pump motor power | KW | 11+7.5 | 11+11 | 11+11 | 22+11 |
Heater Power | KW | 3.5/3.5 | 6.0/7.5 | 6.0/7.5 | 11.5/6.0 |
GENERAL | |||||
Oil tank capacity | L | 260 | 490 | 410 | 630 |
Machine weight | Ton | 6.8 | 8.0 | 9.5 | 15.0 |
Machine dimension | M | 4.6×1.5×1.7 | 5.2×1.7×1.9 | 5.6×1.8×2.0 | 7.0×2.0x2.3 |
* Some data may updated without any notice |
L Shape BJM126S-L ~ BJM250S-L
Description | UNIT | BJM126S6-L | BJM160S6-L | BJM200S6-L | BJM250S6-L |
International Size | 1260-540 | 1600-760 | 2000-1090 | 2500-1640 | |
CLAMPING UNIT | |||||
Clamping force | KN | 1200 | 1600 | 2000 | 2500 |
Opening stroke | mm | 350 | 440 | 490 | 520 |
Max.daylight | mm | 750 | 940 | 1040 | 1100 |
Platen size | mm | 610×610 | 705×705 | 775×755 | 800×760 |
Max. mold size | mm | 410×410 | 460×460 | 510×510 | 560×490 |
Max.mold thickness | mm | 400 | 500 | 550 | 580 |
Min.mold thickness | mm | 145 | 160 | 230 | 230 |
Ejector stroke | mm | 100 | 140 | 140 | 145 |
Ejector force | KN | 42 | 49 | 65 | 77 |
INJECTION UNIT | |||||
Screw diameter | mm | 40/28 | 46/28 | 52/28 | 60/36 |
Screw L/D ratio | 20/20 | 20.5/20 | 20/20 | 21/20 | 21/20 |
Injection pressure | Mpa | 166/202 | 177/202 | 180/202 | 169/185 |
Shot volume | cm3 | 238/73 | 340/73 | 520/73 | 791/163 |
Shot weight (PS) | g | 213/62 | 302/62 | 462/62 | 704/145 |
Injection rate | g/s | 109/62 | 126/62 | 153/62 | 259/78 |
Plasticizing capacity | g/s | 23/12 | 27/12 | 38/12 | 50/19 |
Screw stroke | mm | 190/120 | 205/120 | 245/120 | 280/160 |
Screw speed | r.p.m. | 190/200 | 210/200 | 170/200 | 170/174 |
POWER UNIT | |||||
Hydraulic pressure | Mpa | 17.5 | 17.5 | 17.5 | 17.5 |
Pump motor power | KW | 11.0/7.5 | 15.0/7.5 | 18.5/7.5 | 22.0/11.0 |
Heater power | KW | 7.8/3.5 | 9.8/3.5 | 11.5/3.5 | 13.8/6.0 |
GENERAL | |||||
Oil tank capacity | L | 200+120 | 260 | 340 | 420 |
Machine weight | Ton | 4.2 | 5.5 | 6.5 | 8.5 |
Machine dimension | M | 4.3×2.4×1.8 | 4.8×2.5×1.8 | 5.3×2.6×2.1 | 5.8×2.7×2.2 |
* Some data may updated without any notice |
L Shape BJM288S-L ~ BJM500S-L
Description | UNIT | BJM288S6-L | BJM330S6-L | BJM400S6-L | BJM500S6-L |
International Size | 2880-1640 | 3300-2200 | 4000-2889 | 5000-3900 | |
CLAMPING UNIT | |||||
Clamping force | KN | 2880 | 3300 | 4000 | 5000 |
Opening stroke | mm | 550 | 600 | 710 | 830 |
Max.daylight | mm | 1160 | 1300 | 1440 | 1680 |
Platen size | mm | 850X850 | 985×985 | 1050×1050 | 1260×1260 |
Bars distance | mm | 610×610 | 670×670 | 740×720 | 820×780 |
Max.mold height | mm | 610 | 700 | 730 | 850 |
Min.mold height | mm | 280 | 300 | 300 | 300 |
Ejector stroke | mm | 145 | 180 | 210 | 220 |
Ejector force | KN | 77 | 77 | 110 | 135 |
INJECTION UNIT | |||||
Screw diameter | mm | 60/36 | 68/36 | 83/40 | 90/40 |
Screw L/D ratio | 21/20 | 20.6/20 | 19/20 | 20/20 | |
Injection pressure | Mpa | 169/185 | 169/185 | 140/166 | 140/166 |
Shot volume | cm3 | 791/163 | 1126/163 | 1786/23/ | 2481/238 |
Shot weight (PS) | g | 704/145 | 1002/145 | 1590/213 | 2208/213 |
Injection rate | g/s | 259/78 | 324/78 | 421/109 | 480/109 |
Plasticizing capacity | g/s | 50/19 | 67/19 | 80/23 | 88/23 |
Screw stroke | mm | 280/160 | 310/160 | 330/190 | 390/190 |
Screw speed | r.p.m. | 170/174 | 180/174 | 120/190 | 120/190 |
POWER UNIT | |||||
Hydraulic pressure | Mpa | 17.5 | 17.5 | 17.5 | 17.5 |
Pump motor power | KW | <22/11/td> | 30/11 | 37/11 | 45/11 |
Heater power | KW | 13.8/6.0 | 18.0/6.0 | 22.0/6.0 | 28.0/6.0 |
GENERAL | |||||
Oil tank capacity | L | 420 | 460 | 630 | 810 |
Machine weight | Ton | 9.5 | 12.0 | 16.5 | 20.0 |
Machine dimension | M | 6.3×2.7×2.2 | 6.8×2.8×2.3 | 7.2×2.8×2.3 | 8.7×3.2×2.3 |
* Some data may updated without any notice |
BJM50V6-C ~ BJM90V6-C
Description | UNIT | BJM50V6-C | BJM90V6-C |
International Size | 500-98 | 900-472 | |
CLAMPING UNIT | |||
Clamping force | KN | 500 | 900 |
Opening stroke | mm | 265 | 320 |
Max.daylight | mm | 580 | 680 |
Platen size | mm | 480×480 | 540×540 |
Max. mold size | mm | 315×315 | 360×360 |
Max.mold thickness | mm | 310 | 360 |
Min.mold thickness | mm | 110 | 130 |
Ejector stroke | mm | 70 | 100 |
Ejector force | KN | 20 | 34 |
INJECTION UNIT | |||
Screw diameter | mm | 22/25 | 28/32 |
Shot volume | cm3 | 38/49 | 99/129 |
Shot weight (PS) | g | 20/32 | 88/115 |
Screw stroke | mm | 166 | 260 |
POWER UNIT | |||
Hydraulic system pressure | Mpa | 16 | 16 |
Pump motor power | KW | 7.5 | 11.0 |
Heater power | KW | 3.5 | 6.0 |
GENERAL | |||
Dry-cycle time | Sec. | 1.2 | 1.5 |
Oil tank capacity | L | 120 | 180 |
Machine weight | Ton | 2.0 | 2.6 |
Machine dimension | M | 3.4×1.0x1.6 | 4.0×1.2×1.7 |
* Some data may updated without any notice |
SPECIFICATIONS
Description | UNIT | KF168- V/S6 | KF208- V/S6 | KF268- V/S8 | KF300- V/S8 | KF380- V/S8 | KF460- V/S8 |
International Size | 1600-380 | 2080-380 | 2680-560 | 3000-850 | 3800-850 | 4600-940 | |
CLAMPING UNIT | |||||||
Clamping force | KN | 1600 | 2080 | 2680 | 3000 | 3800 | 4600 |
Opening stroke | mm | 440 | 490 | 520 | 550 | 580 | 600 |
Max.daylight | mm | 940 | 1040 | 1100 | 1150 | 1230 | 1270 |
Platen size | mm | 705×705 | 775×755 | 910×850 | 950×900 | 1000×1000 | 1070×1050 |
Bars distance | mm | 460×460 | 505×505 | 580×520 | 620×570 | 670×670 | 690×670 |
Max.mold height | mm | 500 | 550 | 580 | 600 | 650 | 670 |
Min.mold height | mm | 160 | 230 | 230 | 250 | 240 | 250 |
Ejector stroke | mm | 140 | 145 | 145 | 145 | 180 | 1500 |
Ejector force | KN | 49 | 65 | 77 | 77 | 77 | 77 |
INJECTION UNIT | |||||||
Screw diameter | mm | 42 | 42 | 46 | 52 | 52/60 | 55 |
Screw L/D ratio | 22 | 22 | 22 | 22 | 22 | 24 | |
Injection Pressure | Mpa | 190 | 190 | 189 | 188 | 188 | 157.5 |
Shot volume | cm3 | 201 | 201 | 299 | 425 | 425 | 594 |
Shot weight (PS) | g | 179 | 179 | 267 | 379 | 379 | 552 |
Injection rate(PS) | g/s | 225 | 225 | 327 | 503 | 786 | 1033.3 |
Screw stroke | mm | 145 | 145 | 180 | 200 | 200 | 250 |
Screw speed | r.p.m. | 300 | 300 | 300 | 300 | 300 | 300 |
POWER UNITE | |||||||
Hydraulic Pressure | Mpa | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 |
Pump motor power | KW | 22 / 40 | 22 / 40 | 37 / 50 | 40 + 40 | 40 + 40 | 40+40+16 |
Heat power | KW | 14.2 | 14.2 | 16.4 | 21 | 28.5 | 40 |
GENERAL | |||||||
Oil tank capacity | L | 340 | 420 | 420 | 680 | 810 | 1140 |
Machine weight | Tons | 4.6 | 7.0 | 7.5 | 10.5 | 13.0 | 16.0 |
Dimensions | M | 4.8×1.4×1.8 | 5.5×1.4×1.8 | 5.6×1.4×2.1 | 6.7×1.9×2.2 | 7.1×1.9×2.2 | 8.1×2.2×2.0 |
* Some data may updated without any notice |
SPECIFICATIONS
Description | UNIT | KF168- V/S6 | KF208- V/S6 | KF268- V/S8 | KF300- V/S8 | KF380- V/S8 | KF460- V/S8 |
International Size | 1600-380 | 2080-380 | 2680-560 | 3000-850 | 3800-850 | 4600-940 | |
CLAMPING UNIT | |||||||
Clamping force | KN | 1600 | 2080 | 2680 | 3000 | 3800 | 4600 |
Opening stroke | mm | 440 | 490 | 520 | 550 | 580 | 600 |
Max.daylight | mm | 940 | 1040 | 1100 | 1150 | 1230 | 1270 |
Platen size | mm | 705×705 | 775×755 | 910×850 | 950×900 | 1000×1000 | 1070×1050 |
Bars distance | mm | 460×460 | 505×505 | 580×520 | 620×570 | 670×670 | 690×670 |
Max.mold height | mm | 500 | 550 | 580 | 600 | 650 | 670 |
Min.mold height | mm | 160 | 230 | 230 | 250 | 240 | 250 |
Ejector stroke | mm | 140 | 145 | 145 | 145 | 180 | 1500 |
Ejector force | KN | 49 | 65 | 77 | 77 | 77 | 77 |
INJECTION UNIT | |||||||
Screw diameter | mm | 42 | 42 | 46 | 52 | 52/60 | 55 |
Screw L/D ratio | 22 | 22 | 22 | 22 | 22 | 24 | |
Injection Pressure | Mpa | 190 | 190 | 189 | 188 | 188 | 157.5 |
Shot volume | cm3 | 201 | 201 | 299 | 425 | 425 | 594 |
Shot weight (PS) | g | 179 | 179 | 267 | 379 | 379 | 552 |
Injection rate(PS) | g/s | 225 | 225 | 327 | 503 | 786 | 1033.3 |
Screw stroke | mm | 145 | 145 | 180 | 200 | 200 | 250 |
Screw speed | r.p.m. | 300 | 300 | 300 | 300 | 300 | 300 |
POWER UNITE | |||||||
Hydraulic Pressure | Mpa | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 |
Pump motor power | KW | 22 / 40 | 22 / 40 | 37 / 50 | 40 + 40 | 40 + 40 | 40+40+16 |
Heat power | KW | 14.2 | 14.2 | 16.4 | 21 | 28.5 | 40 |
GENERAL | |||||||
Oil tank capacity | L | 340 | 420 | 420 | 680 | 810 | 1140 |
Machine weight | Tons | 4.6 | 7.0 | 7.5 | 10.5 | 13.0 | 16.0 |
Dimensions | M | 4.8×1.4×1.8 | 5.5×1.4×1.8 | 5.6×1.4×2.1 | 6.7×1.9×2.2 | 7.1×1.9×2.2 | 8.1×2.2×2.0 |
* Some data may updated without any notice |
SPECIFICATIONS
Small High Speed PET Preform Injection Molding Machines
SPECIFICATION | UNIT | HPET-1200V6 | HPET-1450V6 | HPET-1500V6 | HPET-4500V6 |
International Size Rating | 2000-1088 | 2000-1440 | 2880-1440 | 4000-5310 | |
Screw diameter | mm | 67 | 75 | 75 | 105 |
Shot volume | cm3 | 952 | 1303 | 1303 | 3897 |
Shot weight (@PS 1.05) | g | 850 | 1163 | 1163 | 3478 |
Shot weight (@PET 1.3) | g | 1108 | 1516 | 1516 | 4534 |
Shot weight (@PP 0.9) | g | 685 | 938 | 938 | 2806 |
Screw stroke | mm | 270 | 295 | 295 | 450 |
Max. Screw rotary speed | rpm | 160 | 170 | 170 | 135 |
CLAMPING UNIT | |||||
Clamping Force | KN | 2000 | 2000 | 2880 | 4000 |
Opening stroke | mm | 490 | 490 | 55 | 710 |
Max. daylight | mm | 1040 | 1040 | 1160 | 1440 |
Space between bars | mmxmm | 510 x 510 | 510 x 510 | 610 x 610 | 740 x 720 |
Movable platen size | mmxmm | 775 x 755 | 775 x 755 | 850 x 850 | 1050 x 1050 |
Max. mold height | mm | 550 | 550 | 610 | 730 |
Min. mold height | mm | 230 | 230 | 280 | 300 |
Ejector stroke | mm | 160 | 160 | 175 | 210 |
Ejector force | KN | 99 | 99 | 111 | 184 |
Ejector force | KN | 77 | 77 | 77 | 115 |
No. of ejector pins | / | 6 + 1 | 6 + 1 | 4 +1 | 12 + 1 |
POWER UNIT | |||||
Hydraulic system pressure | Mpa | 17.5 | 17.5 | 17.5 | 17.5 |
Pump motor power | KW | 22 + 22 | 22 + 30 | 30 + 30 | 45 + 55 |
Heater power | KW | 16.5 | 20 | 20 | 40 |
Total current | A | 157.5 | 200 | 220 | 320 |
GENERAL | |||||
Oil tank capacity | L | 650 | 1000 | 1200 | 1800 |
Machine Weight | Ton | 7.2 | 8.5 | 9.5 | 22 |
Machine Dimensions(L*W*H) | M | 5.8 x 1.4 x 2.2 | 6.5 x 1.4 x 2.2 | 6.8 x 1.55 x 2.2 | 9.0 x 2.2 2.3 |
High Speed PET Preform Injection Molding Systems
Description | UNIT | HPET-3300V6 | HPET-4500V6 | HPET-500V6 |
International Size | 3300-2456 | 4000-3686 | 5000-4512 | |
CLAMPING UNIT | ||||
Clamping force | KN | 3300 | 400 | 500 |
Opening stroke | mm | 580 | 710 | 830 |
Max.daylight | mm | 1280 | 1530 | 1800 |
Platen size | mm | 940×1140 | 1100×1230 | 1240×1340 |
Bars distance | mm | 660x86x | 780×860 | 920×1020 |
Max.mold height | mm | 700 | 820 | 970 |
Min.mold height | mm | 300 | 400 | 450 |
Ejector stroke | mm | 180 | 200 | 200 |
Ejector force | KN | 184 | 270 | 360 |
Ejection pin number | 8+1 | 12+1 | 12+1 | |
INJECTION UNIT | ||||
Screw diameter | mm | 95 | 105 | 115 |
Screw L/D ratio | / | 24 | 24 | 24 |
Molten screw stroke | mm | 420 | 450 | 460 |
Injection pressure | Mpa | |||
Injection screw diameter | mm | 100 | 110 | 120 |
Injection screw stroke | mm | 375 | 400 | 420 |
Shot volume | cm3 | 2945 | 3800 | 4750 |
Shot weight (PS) | g | 2770 | 3570 | 4464 |
Shot weight (PET) | g | 3430 | 4420 | 5527 |
Shot weight (PP) | g | 2370 | 2740 | 3420 |
Injection pressure | Mpa | 92 | 97 | 95 |
Max. screw rotary speed | r.p.m. | 130 | 120 | 107 |
POWER UNIT | ||||
Hydraulic pressure | Mpa | 1735 | 17.5 | 17.5 |
Pump motor power | KW | 55+37 | 30+30+35 | 37+37+45+45 |
Heater power | KW | 31 | 65 | 80 |
GENERAL | ||||
Oil Capacity | L | 800 | 1600 | 2100 |
Machine weight | Ton | 20 | 21 | 24 |
Machine dimension | m | 8.9x4x2.4 | 10.4×4.3×2.6 | 12×4.5×2.8 |
* Due upgrading of machines, the technical parameters may be updated. |
SPECIFICATIONS
Description | UNIT | KE-258S6 |
International Size | 2500-502 | |
CLAMPING UNIT | ||
Clamping force | KN | 2580 |
Opening stroke | mm | 520 |
Max.daylight | mm | 1100 |
Platen size | mm | 800×760 |
Max. mold size | mm | 560×490 |
Max.mold thickness | mm | 580 |
Min.mold thickness | mm | 230 |
Ejector stroke | mm | 145 |
Ejector force | KN | 77 |
INJECTION UNIT | ||
Screw diameter | mm | 46 |
Screw L/D ratio | 24 | |
Injection pressure | Mpa | 168 |
Shot volume | cm3 | 299 |
Shot weight (PS) | g | 266 |
Injection rate | g/s | 368 |
Plasticizing capacity | g/s | 50 |
Screw stroke | mm | 180 |
Screw speed | r.p.m. | 350 |
POWER UNIT | ||
Hydraulic pressure | Mpa | 17.5 |
Pump motor power | KW | 11+41 |
Heater power | KW | 17.7 |
GENERAL | ||
Dry-cycle time | Sec. | 3 |
Oil tank capacity | L | 420 |
Machine weight | Ton | 8.2 |
Machine dimensions | M | 5.9×1.5×2.2 |
* Some data may updated without any notice |